Monitoring - GeoVision GV-VS02 User Manual

4.4 Monitoring

You can start recording manually, by schedule or by input trigger.
[Manual] Manually activates motion detection and I/O monitoring. Select one of the
following options and then click the Start button.
Select all: Manually starts recording and I/O monitoring as well.
Camera 1, Camera 2: Manually starts recording. Select the desired camera(s) and the
recording mode for recording.
Input: Manually starts I/O monitoring. When the input is triggered, its associated
camera and output will also be activated for recording and alerting. For input settings,
see 4.2.2 Input/Output Settings.
[Schedule] The system starts recording and I/O monitoring based on the schedule you set.
For schedule settings, see 4.5 Recording Schedule.
[Start monitoring by Input X] Starts monitoring by the assigned input. When the
assigned input is triggered, the system will respond based on your recording or I/O
monitoring settings in above Manual or Schedule options.
[Stop monitoring by Output X] Stops monitoring by the assigned output. When the
assigned input is triggered, the system will stop monitoring.
[Camera Status Icon]
: Manual recording
: On standby
Figure 4-22
: Schedule recording
: Enabled for motion detection and input trigger
Administrator Mode
4
55