Setting Up Ip Cameras - GeoVision GV-VS02 User Manual

7.1 Setting Up IP Cameras

To set up IP cameras on the GV-System, follow these steps:
1. On the main screen, click the Configure button, select General Setting, select
Camera / Audio Install and click IP Camera Install. This dialog box appears.
2. Check Install IP Camera, and select the number of IP Cameras you want to link to,
and click Configure. This dialog box appears.
• To automatically set up the camera, click Scan Camera to detect any GV IP
devices on the LAN.
• To manually set up the camera, click Add Camera.
The following steps are the example of manual setup.
3. Click Add Camera. This dialog box appears.
Figure 7-4
Figure 7-2
Figure 7-3
DVR Configurations
7
89