Video & Motion; Multicast - GeoVision GV-VS02 User Manual

4.1 Video & Motion
This section includes the video image settings and introduces how the images can be
managed by using Multicast, Motion Detection, Privacy Mask and Visual Automation.

4.1.1 Multicast

Note this function is only available on GV-VS02 (Firmware Version 1.46).
The Multicast view allows the GV-Video Server receiving video and audio streams from a
multicast group. It also enables the GV-Video Server to receive audio broadcast from other
hosts in the multicast group.
To join a multicast group and listen to audio broadcasting, it is required to activate the
related settings in 4.7.5 Mulitcast.
1. The host(s), in the multicast group, is displayed automatically on the host list. If you
cannot see any host displayed, click the Configure button, select General Setup, and
ensure the relevant IP address and port number are correctly configured.
2. Drag the desired cameras to the screen for display. If the host has already set a
password, you will be promoted to enter it at this step.
28
Figure 4-2
Configure Button
Host List