Wireless-Client Mode - GeoVision GV-VS04H User Manual

4.7.2 Wireless-Client Mode

To use the wireless function, a wir
wireless LAN adaptors, see Appendix B.
Network type: Select the network mode Ad Hoc or Infrastructure.
Infrastructure: Via the Access Point to connect to the Interne
gives wireless access to the Internet or data sharing under a p
environment.
Ad-Hoc: A Peer-to-Peer mode.
WLAN card, and does not need the Access Point to connect to each
e (SSID): The SSID (Service Set Identify) is a unique name that
Network nam
identifies a particular wireless network. Type SSID of the Wireless
Access Point you are going to connect to.
oint Survey: Click this button to search all the available Access Points
Access P
(Infrastructure mode) and wireless stations (AD-Hoc mo
WLAN card.
Authentication Type: Select one of these network authentications and data
encryptions: Disable, WEP, WPAPSK-TKIP, WPAPSK-AES, WPA2PSK-TKIP or
WPA2PSK-AES.
Disabled: No authentication is needed within the wireless network.
eless LAN USB adaptor is required. For supported
Figure 4-32
This mode connects to other computer with the
Administrator Mode
4
t. This mode further
reviously wired
other.
LAN group or
de) within the range of your
85