1.6.2.3 GV-VS12
No. Name
1
Power In
2
Ethernet Port
3
USB Port
4
I/O / PTZ Port
RS-232
5
Terminal Block
6
Default Button
7
Ready LED
8
Power LED
Figure 1-9
Function
A plug for power input.
A plug for inserting an Ethernet cable to build the network
connection.
1 USB port for installing the portable storage device.
A port for digital input, relay output and PTZ camera control. Insert
the I/O Cable with RJ-45 Connector to this port. See Chapter 9
Auxiliary Device Connectors.
The connectors for GPS module control. See Chapter 9 Auxiliary
Device Connectors.
It resets all configurations to their factory settings.
To use this function, follow these steps:
1. Unplug and plug the power cable.
2. Press and hold the Default button. Wait until the Ready LED is
flickering.
3. Release the Default button. You successfully return to the
default settings.
This LED is on, indicating the GV-Video Server is ready for
connection.
This LED is on, indicating the power is supplied.
Introduction
1
9