Ftp - GeoVision GV-VS02 User Manual

From email address: Type the sender's e-mail address.
Send to: Type the e-mail address(s) you want to send alerts to.
Alerts Interval Time: Specify the interval between e-mail alerts. The interval can be
between 0 and 60 minutes. The option is useful for the frequent event condition. It will
ignore any event triggers during the interval period.
[Need authentication to login] If the SMTP Server needs authentication, select this
option and type the valid username and password.
Snapshot Resolution: (Note this option is only available for GV-VS12.) Select D1 or
CIF to be the resolution of snapshot images.
[Alarm Settings] (Note this option is only available for GV-VS02A and GV-VS12.) You
can choose to automatically send an e-mail for alarm notification under these conditions:
video lost, tampering alarm, disk write error and hard disk full.
Note: The Tampering Alarm option is only available for GV-VS12.
For the related settings to send e-mail alerts, see 4.1.3 Motion Detection, 4.2.2
Input/Output Settings and 4.4 Monitoring.

4.3.2 FTP

You can also send the captured still image to a remote FTP server for alerts.
46
Figure 4-16