Tools - GeoVision GV-VS02 User Manual

4.8.7 Tools

This section allows you to execute certain system operations and view the firmware
version.
[Host Settings] Enter a descriptive name for the GV-Video Server.
[Firmware Update] This field displays the firmware version of the GV-Video Server.
[System Settings] Clicking the Load Default button will make the GV-Video Server
restore factory default settings. The Ready LED on the front panel will turn off. Wait until
the Ready LED turns on and re-log in the server.
Note: After applying the default function, you will need to configure the GV-Video
Server's network setting again.
[Reboot]
Clicking the Reboot button will make the GV-Video Server perform the software reset. The
Ready LED on the front panel will turn off. Wait until the Ready LED turns on and re-log in
the server.
Figure 4-37
Administrator Mode
4
75