4.1 Video and Motion
This section includes the video image settings and introduces how the ima
managed by using Multicast, Motion Dete
Automation and Video Channel Source Settings.
4.1.1 Multicast
Note this function is only available for GV-VS04H (Firmware Version 1.03 or later), GV-
VS11, GV-VS12 (Firmware Version 1.05 or later) and GV-VS14.
The Multicast view allows the GV-Video Server receiving video and audio streams from a
multicast group. It also enables the GV-Video Server to receive audio broa
hosts in the multicast group
To join a multicast group and listen to audio broadcasting, it is required to activate the
related settings in 4.7.5 Multicast.
1. The host(s), in the multicast group, is displayed automatically on the host list. If you
cannot see any host displayed, click the Configure button, select General Setup, select
Multicast and ensure the relevant IP address, port number and network card are
correctly configured.
40
ction, Privacy Mask, Tampering Alarm, Visual
.
Figure 4-2
ges can be
dcast from the
Configure Button
Host List