Motion Detection - GeoVision GV-Recording Server User Manual

5.2.3 Motion Detection

Set up motion detection to generate a notification or to begin recording whenever movement
occurs in the video image. You can set up to 8 areas with different sensitivity values for
motion detection.
1. In the Working Camera List, select a camera.
2. The default sensitivity value is 8 for the entire area. To define a different sensitivity value,
right-click the camera view and click Delete.
3. Select the sensitivity by moving the slider. The higher the value, the more sensitive the
camera is to motion.
4. Drag an area on the image. Click Add when you are prompted to confirm the setting.
5. To create several areas with different sensitivity values, repeat steps 3 and 4.
6. Set a time Interval in milliseconds to specify the frequency of motion detection. A smaller
interval will make motion detection more precise.
7. To detect motion from only key frames, select Only Key Frame.
8. To reduce server loading by using the motion detection function on the camera, select
Use camera motion detection to reduce the server load.
9. To overwrite the motion detection settings set on the Web interface of the camera with
the settings on GV-Recording Server, select Update settings to IP device.
10. Click Save.
42
Figure 5-20