Fujitsu Primergy BX620 S4 User Manual page 77

2
Insert the PRIMERGY Startup Disc.
3
Double-click the icon of the LAN device.
The properties are displayed.
4
Click the [Driver] tab and click [Updating Driver].
The [Hardware Update Wizard] window appears.
5
Select [Install from the list or specified location] and click [Next].
6
Select [Not searching and select installing driver] and click [Next].
7
Click [Use Disk].
8
Specify the following folder name in the "Copies files from manufacture's file",
and click [OK].
For Onboard LAN
\DRIVERS\LAN\Broadcom\Onboard\NetXtreme\Windows2003x64\Driver
For 1 Gbit/s Ethernet I/O Module
\DRIVERS\LAN\Broadcom\Ext\W2K3x64\l4nd_w2k3
For LAN Card (PG-2861L)
\DRIVERS\LAN\Intel\Pro1000\Winx64
9
Click [Next].
Driver installation procedures starts.
10
Click [Finish].
11
Click [Close].
12
Eject the PRIMERGY Startup Disc and reboot the Server Blade.
■ For Windows Server 2003
1
Double-click a LAN device name under [Network adapters].
Names of the LAN devices are displayed as follows.
Onboard LAN
1Gbit/s Ethernet I/O Module
(PG-LND201)
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-
T lp (PG-2861L)
table: LAN device name
Type of LAN device
PRIMERGY BX620 S4 Server Blade User's Guide
LAN device name
Broadcom NetXtreme Gigabit Fiber
Broadcom BCM5708S NetXtreme II GigE (NDIS
VBD Client)
Intel(R) PRO/1000 PT Dual Port Server Adapter
5
6
7
8
9
77