Notes On Referring To The Intel® Proset Help Topics; Teaming Function - Fujitsu Primergy BX620 S4 User Manual

5.7.2 Notes on Referring to the Intel
When referring to help topics, note the following points.
• Do not use the driver downloaded from the Intel Corporation online service page on this server.
• If the descriptions in the help and this manual vary, give priority to this manual.
• The LAN cards names in Help corresponds to the cards as follows:
LAN cards names in Help
PRO/1000 Server
PRO/1000 Adapter
PRO/1000 Copper Adapter
• The controller used for each device is as follows:
LAN device
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp
(PG-2861L)

5.7.3 Teaming Function

■ Notes
The notes on using the teaming function are as follows:
For more details, refer to [Help] in Intel
• The teaming function is available only for Windows Server 2003.
• Once a Team is created, a virtual adapter (example: Intel(R) Advanced Network Services Virtual
Adapter) is created on OS. Upper protocols are bound with the virtual adapter, not each physical
adapter composing the team.
• Do not use the high-speed teaming function.
• When ALB is being used, you cannot use Windows Load Balancing Service (WLBS) or Network
Load Balancing (NLB).
• Up to four LAN ports are available for each AFT/ALB team configuration.
Up to two teams can be configured in the same system. Each system has different limitations for the
number of available LAN ports.
• Up to two LAN ports are available for each SFT team configuration. Up to two teams can be
configured in the same system.
• LAN cards in a team must be on the same network (broadcast domain). The IP address is shared.
• Only the following protocols are available for the teaming function.
• AFT/SFT: IP, NetBEUI, IPX (NCP), IPX (NetBIOS)
• ALB: IP, IPX (NCP)
table: LAN cards names in Help.
Corresponding LAN devices
PG-2861L
PG-2861L
PG-2861L
table: Controller being used
Controller being used
®
Intel 82546EB
®
PROSet.
PRIMERGY BX620 S4 Server Blade User's Guide
®
PROSet Help Topics
1
2
3
4
6
7
8
9
119