Fujitsu Primergy BX620 S4 User Manual page 71

3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the "InstallShieled(R) wizard has completed" message appears, eject the
PRIMERGY Startup Disc from the CD/DVD drive and click [Finish] to restart the
system.
9
Install the display driver.
1. Insert the PRIMERGY Startup Disc into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the PRIMERGY Startup Disc.
[CD/DVD drive] :\DRIVERS\VIDEO\ES1000\Setup.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the installation is completed, eject the PRIMERGY Startup Disc from the CD/
DVD drive and click [Finish] to restart the system.
10
Install the LAN driver.
Install the LAN driver using PRIMERGY Startup Disc. For details, refer to "4.3 Installing the
LAN Driver" ( p.75).
11
Install the Fibre Channel Driver.
When the Fibre Channel Expansion Board has been installed, after installing Windows Server
2003 x64, install the Fibre Channel Driver using driver disk created beforehand. For details, refer
to "4.4.1 Windows Server 2003 x64" ( p.82).
12
Install high reliability tools.
To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" ( p.127) and install
high reliability tools.
13
Set an administrator account for the RAID management tool (ServerView
RAID).
For the setting procedure, refer to the "Integrated Mirroring SAS User's Guide" in the Array
Controller Document & Tool CD.
The installation of Windows Server 2003 x64 is completed.
●
Before starting operation
After OS installation, refer to "Chapter 5 Operations after OS Installation" ( p.85) and perform
necessary operations.
PRIMERGY BX620 S4 Server Blade User's Guide
5
6
7
8
9
71