Setting Up The Printer - Fujitsu Primergy BX620 S4 User Manual

■ License for use of system for ServerStart
"License for Use of System for ServerStart" linked from the ServerStart startup window is a license for
use of Windows PE contained in ServerStart of the PRIMERGY Startup Disc. Windows PE for starting
up ServerStart can be only used for installing Windows Server 2003 R2 and Windows Server 2003,
provided under a separate legal license.
■ Display of onboard LAN
Display of an onboard LAN on your OS is as below when OS installation performs with ServerStart.
LAN Port
Onboard LAN
■ Adapter numbers
For ServerStart, onboard multiple LAN adapters (network adapter) may be configured on OS
installation wizard.
To configure multiple LAN cards, select the adapter numbers in order of Adapter 1 and Adapter 2, and
enter settings for each adapter. Note that the order of adapter numbers is not necessarily the same as the
order of slots for the installed LAN adapters. This means that the setting for Adapter 1 is not always
applied to the onboard LAN. After installing the OS, check the LAN adapters to make sure that they are
configured as intended.

■ Setting up the printer

ServerStart does not support setup of printers. Perform installation after setup is completed.
■ Caution when installing the LAN expansion board (PG-LND201)
When installing an OS using ServerStart in a device which contains a LAN expansion board (PG-
LND201), the Connection Name and IP address settings that are set in the network protocol screen of the
OS installation wizard will not be set.
Allocate the Connection Name and IP address in the LAN expansion board (PG-LND201) manually
after the OS installation.
PRIMERGY BX620 S4 Server Blade User's Guide
table: Display of Onboard LAN
Property on My Network
Local Area Connection
LAN Device Name
BroadcomNetXtreme Gigabit Ethernet
41