Installing The Fibre Channel Driver; Windows Server 2003 X64 - Fujitsu Primergy BX620 S4 User Manual

Chapter 4 Manual OS Installation
4.4 Installing the Fibre Channel
Driver
This section explains how to install a fibre channel driver when the 2Gbit/s FC I/O
Module (PG-FCD102) is extended.
When 4Gbit/s FC I/O Module (PG-FCD201) is extended, refer to the option manual.
The latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

4.4.1 Windows Server 2003 x64

1
Create the driver disk.
Windows Server 2003 x64 takes different measures in creating driver disks.
Create as follows using the PRIMERGY Startup Disc or downloaded file from the Fujitsu
PRIMERGY website (http://primergy.fujitsu.com).
Creating from PRIMERGY Startup Disc
Copy all the files stored in the following folder.
[CD/DVD Drive]: \DRIVERS\FCD\STOR_MINOPORT
Using downloaded files from the website
Copy all the files stored in the "Driver Folder (\FCD)" to the floppy disk.
2
Insert the driver disk created from the PRIMERGY Startup Disc into the server.
3
Click [Start] – [Administrative Tools] – [Computer Management].
4
Click [Device Manager].
Two ports of the fibre channel, which is installed in the 2Gbit/s FC I/O Module, are displayed
with the names below.
• [QLogic Fibre Channel Adapter] or [QLogic QLA23xx PCI Fibre Channel Adapter] under
[SCSI and RAID controller]
Double-click each fibre channel controller and perform the following Steps 4 to 11 on all fibre
channel ports.
5
Double-click the icon of the fibre channel controller.
The properties window appears.
6
Click the [Driver] tab and click [Update Driver].
The [Welcome to the Hardware Update Wizard] window appears.
7
Select "Install from the list or specified location" and click [Next].
82