Usb Configuration Submenu - Fujitsu Primergy BX620 S4 User Manual

■ USB Configuration Submenu

Item
Module Version
USB Devices Enabled
USB Functions
USB 2.0 Controller
Legacy USB Support
USB Mass Storage Device
Configuration
USB Mass Storage Reset
Delay
Device #1
Emulation Type
(Device #1)
Device #2
Emulation Type
(Device #2)
PRIMERGY BX620 S4 Server Blade User's Guide
table: Items on the USB Configuration Submenu
Setting
-
-
4 USB Ports
(Unchangeable)
Enabled (Unchangeable)
Auto (Unchangeable)
[Enter]
20Sec (Unchangeable)
-
Auto (Unchangeable)
-
Auto (Unchangeable)
Description
Displays the USB code version of the AMI
BIOS.
Displays the number of the connected USB
devices.
Sets whether or not to use the hardware
conforming to the USB standard.
Sets whether or not to enable the USB-based
controller (standard 2.0).
This item appears when [USB Functions] is set to
[4 USB Ports].
Sets whether or not to use the USB-connected
keyboard and mouse.
This item appears when [USB Functions] is set to
[4 USB Ports].
Press [Enter] key to display the [USB Mass
Storage Device Configuration] submenu. This
item appears when the device is connected via
USB.
Sets the number of seconds to wait for a response
after USB Mass Storage Device has been
initialized during POST.
Displays the connected device.
Sets the type of the connected device. This item
appears when a USB Mass Storage Device is
connected.
Displays the connected device.
Sets the type of the connected device. This item
appears when a USB Mass Storage Device is
connected.
1
175