Location Of Memory Module Installation; Available Memory Modules And Notes - Fujitsu Primergy BX620 S4 User Manual

7.4.1 Location of Memory Module Installation

Install memory modules to the memory slots in the Server Blade.
Each memory bank consists of slot 1/2, 3/4, 5/6, and 7/8 on this Server Blade.
To add more memory, install memory modules in pairs, each having the same capacity, to the
corresponding slots in the sequence of Bank 1, Bank 2, Bank 3, and Bank 4, in ascending order of their
capacity.
Memory bank 1 has memory modules as the standard.
[Front]
Baseboard
Memory Slot 1 (Standard)
Memory Slot 5 (Optional)
Memory bank 1
Memory Slot 2 (Standard)
Memory bank 3
Memory Slot 6 (Optional)
Memory Slot 3 (Optional)
Memory bank 2
Memory Slot 7 (Optional)
Memory Slot 4 (Optional)
Memory bank 4
Memory Slot 8 (Optional)

7.4.2 Available Memory Modules and Notes

■ Available memory modules
Memory of this Server Blade consists of two the Dual In-Line Memory Modules (DIMM) in pairs and
memory modules are extended in pairs.
The following memory module types can be used on this Server Blade.
Product name
Memory Module-1GB
Memory Module-2GB
Memory Module-4GB
Memory Module-8GB
Packaged items of optional memory
Before installing memory modules, refer to "Appendix B.2 Memory Specifications" ( p.227) to check
the contents of the optional package.
PRIMERGY BX620 S4 Server Blade User's Guide
table: List of Available Memory Modules
Model
PG-RM1CE
PG-RM2CE
PG-RM4CE
PG-RM8CE
[Rear]
Remarks
512MB-DDR2 DIMM ×2
1GB-DDR2 DIMM ×2
2GB-DDR2 DIMM ×2
4GB-DDR2 DIMM ×2
1
147