Fujitsu Primergy BX620 S4 User Manual page 144

Chapter 7 Installing Internal Options
9
Return the CPU fastener and the socket lever to their original positions.
1. Close the CPU fastener.
2. Close the socket lever to fasten the CPU.
10
Attach the heat sink.
Remove the grease cover on the back before attaching the heat sink.
Tighten screws
11
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (p.138)
12
Install the Server Blade to the Chassis.
→ "4.2 Installing Server Blades" in "BX600 S3 Blade Server System Unit Hardware Guide"
13
Turn on the Server Blade and check the BIOS Setup Utility settings.
Start the BIOS Setup Utility and select the [Server] menu – the [CPU Status] submenu to check
that [CPUn Status] (n: slot number) is set to [Enabled]. If the CPU is set to [Disabled], change the
setting to [Enabled]. For more details, refer to "8.2.8 Server Menu" ( p.179).
■ How to remove a CPU
To remove a CPU, simply reverse the installation procedures.
144
(1)
CPU fastener
Tighten screws
Heat sink
Carefully tighten the heat sink screws in a cross pattern.
Socket lever
(2)