How To Install The Internal Hard Disk Unit - Fujitsu Primergy BX620 S4 User Manual

Chapter 7 Installing Internal Options

7.7.3 How to Install the Internal Hard Disk Unit

1
Turn off the Server Blade.
→ "3.3 Turning Off the Server" in "BX600 S3 Blade Server System Unit Hardware Guide"
2
Touch a metal part of the Chassis to discharge static electricity.
3
Remove the dummy unit from the bay to accommodate an internal hard disk
unit.
A dummy unit is inserted into a bay not occupied by an internal hard disk unit. Pull the dummy
unit out towards you with its tabs being pressed inward.
Be sure to keep the removed dummy units for later use.
4
Install the internal hard disk unit into the Server Blade.
1. Fully insert the internal hard disk unit in the bay while the cover of the internal hard
disk unit is open.
2. Close the cover of the internal hard disk unit securely, and lock the tab.
162
(2)
(1)