Workflow - Fujitsu Primergy BX620 S4 User Manual

1.4 Workflow

Use the following workflow from server installation to start of operation.
Installing the server
Referring to "Safety Precautions" and "Start Guide", install the server to a suitable place.
Preparing the server
- Install Internal options
- Set hardware
Referring to "BX600 S3 Blade Server System Unit Hardware Guide", the manual of the network blade to use,
"BX600 Management Blade Hardware Guide" and "2.1 Preparation on the server",
"Chapter 7 Installing Internal Options", "Chapter 8 Hardware Configuration/Utilities" in this manual.
Selecting the installation method
Referring to "2.2 Selecting the Installation Method", decide what installation method to use.
ServerStart, a software product that enables everything from OS installation/setup to the installation of
high reliability tools to be performed in one operation, can be used in this server. It is recommended that
ServerStart is used to perform installation.
Checking precautions on installation
Before installing the OS, check the precautions on installation by referring to "2.3 Precautions on Installation".
Using ServerStart
Referring to "Chapter 3 OS Installation Using
ServerStart", perform OS installation.
Installing Internal options
Referring to "Chapter 7 Installing Internal Options", install the Internal options.
Procedures before operation
Before operating the server, refer to "Chapter 5 Operations after OS Installation".
High reliability tool installation
When the OS is installed manually, it is necessary to install high reliability tools. ServerView requires
settings before server operation. For installation method and details about each high reliability tool, refer
to "Chapter 6 High Reliability Tools".
PRIMERGY BX620 S4 Server Blade User's Guide
OS installation
Manual installation
Referring to "Chapter 4 Manual OS
Installation", perform OS installation.
Start operations
29