Installing A Cpu; Location Of Cpu Installation - Fujitsu Primergy BX620 S4 User Manual

Chapter 7 Installing Internal Options

7.3 Installing a CPU

This Server Blade can have up to two CPUs by adding an optional CPU.

7.3.1 Location of CPU Installation

CPU socket 1 is installed with a CPU as standard.
CPUs must be installed in the order of the socket numbers.
CPU socket 2
(optional)
CPU socket 1
(standard)
140
• When installing or removing the CPU, make sure to remove the Server Blade
from the Chassis. Failure to do so may cause electric shock.
For details on how to remove the Server Blade from the Chassis, refer to
"BX600 S3 Blade Server System Unit Hardware Guide".
• Do not install unauthorized third party CPUs. Doing so may cause failures.
• Do not use CPUs that differ in frequency/cache capacity.
An error message appears on the BIOS screen.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the Chassis to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
[Front]
Baseboard
[Rear]