Specifying The On/Off Settings Of The Function (Function On/Off Setting) - Oce cm5520 User Manual

Utility mode
10.16 Specifying the ON/OFF settings of the function (Func-
tion ON/OFF Setting)
ON/OFF settings of the function for transmission or reception are specified.
F-Code TX: ON*/OFF
- Set whether or not to use the F-code transmission function.
- For details on the confidential function, refer to "Confidential transmis-
sion (F-Code TX)" on page 6-69.
- For details on F-Code transmission, refer to "Sending the fax after spec-
ifying the relay destination (F-Code TX)" on page 6-72.
Relay RX: ON*/OFF
- At relay distribution station, original received from Originating station is
broadcast to relay distribution destination. The relay box should be reg-
istered in order to use the relay distribution function.
- For registration of relay box, refer to "Specifying Relay box settings" on
page 9-41.
Relay Printing: ON/OFF*
- The original received from Originating station is printed.
Destination Check Display Function: ON/OFF*
- Whether or not to display the list of specified destinations at the time of
sending the fax is set.
* is a default value at the time of procurement.
cm5520
10
10-59