Oce cm5520 User Manual page 225

6
6
Enter the relay box number of the relay station in the [SUB Address]
with the keypad.
– Up to 20 digits can be entered in the [SUB Address] and [Pass-
word].
– Relay password is mandatory. Numbers 0-9 and # and * can be en-
tered in the password.
– If an incorrect number has been entered, touch [Delete] and then
correct the number.
– When [C] (clear) key is pressed, all entered contents are deleted.
– Touch [No] to cancel the settings.
7
Touch [Password] and enter the relay password.
8
Touch [OK].
Returns to the Communication Method Settings screen.
9
Touch [OK].
Returns to Communication Settings screen.
10
Touch [Close].
Returns to Fax/Scan screen.
11
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning condi-
tions" on page 2-12 or "Scan Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on
page 6-4.
– For details on Communication Settings, refer to "Communication
Settings" on page 6-5.
6-74
Useful transmission functions
cm5520