Registering Program Destinations - Oce cm5520 User Manual

9
9.4

Registering Program destinations

Scan Settings, Original Settings, Communication Settings can be combined
with frequent transmission destinations and registered in program destina-
tions. If these are registered in program destinations, the functions such as
Scan Settings, Original Settings, Communication Settings and registered
destinations can be called, specified and transmitted by just touching the
program button.
A maximum of 400 (001 - 400) program destinations can be registered in-
cluding program destinations of other functions like scanner, etc.
Program names can be registered in program destinations.
The operations of program registration, changing registered programs, de-
leting registered programs are explained below.
Note
The registration is not possible if the name is not set.
!
Detail
Address Book, Group destination and program destination can be regis-
tered using Web Connection.
If Web Connection is used, settings changes and destination registra-
tions can be made from a network computer.
For details on the using Web Connection, refer to the User's Guide [Web
Connection Operations].
Registering program destinations
Follow the procedure given below to register Program destinations.
Note
Change program destinations by using the same procedure.
1
Press [Fax/Scan] key to display Fax/Scan screen.
2
Specify Scan Settings, Original Settings and Communication Settings
if required.
– For details on Scan Settings, refer to "Specifying scanning condi-
tions" on page 2-12 or "Scan Settings" on page 6-2.
9-20
Registering/Specifying Settings
cm5520