Administrator Settings > Fax Settings > Function Settings > Function On/Off Setting; Administrator Settings > Fax Settings > Function Settings > Memory Rx Settings - Oce cm5520 User Manual

10
Administrator Settings > Fax Settings > Function Settings > Function
ON/OFF Setting
ON/OFF settings of the function for transmission or reception are specified.
(page 10-59)
Item
Function
ON/OFF
Setting
Administrator Settings > Fax Settings > Function Settings > Memory RX
Settings
Whether or not to use the Memory RX function is set. (page 10-63)
Item
Memory RX Settings
10-12
Description
F-Code TX Set whether or not to use the F-
code transmission function.
For details on F-code transmis-
sion, refer to page 6-69.
Relay RX At relay distribution station, orig-
inal received from Originating
station is broadcast to relay dis-
tribution destination. The relay
box should be registered in order
to use the relay distribution func-
tion.
Relay The original received from Origi-
Printing nating station is printed.
Destina- Whether or not to display the list
tion Check of specified destinations at the
Display time of sending the fax is set.
Function
Description
Whether or not to use the Memory
RX function is set.
When these settings are valid, set a
password (within 8 digits) to be used
at the time of printing.
Memory RX is the function of printing
the received original after storing in
the memory for some time and then
printing after the receiving such in-
struction and not printing it immedi-
ately.
Utility mode
Values that can be set
ON*/OFF
ON*/OFF
ON/OFF*
ON/OFF*
Values that can be set
Set password in 8 digits/NO*
cm5520