Specifying The Printing Methods For Report (Report Setting) - Oce cm5520 User Manual

10
10.24 Specifying the printing methods for report (Report
Setting)
The printing methods of report and paper feed tray at the time of printing re-
port are set.
Activity Report: ON*/OFF
Set as given below, when it is set to [ON].
Output Settings: Daily/Every 100 comm.*/100/Daily
- Whether or not to print the Activity Report is set and when the report is
to be printed is set.
TX Result Report: ON/If TX fails*/OFF
- Whether to print the TX Result Report or not is set and when the report is
to be printed is set.
Sequential TX Report: ON*/OFF
- Whether sequential TX Report is printed or not is set.
Timer Reservation TX Report: ON*/OFF
- Whether the Timer Reservation TX report is printed or not is set.
Confidential RX Report: ON*/OFF
- Whether Confidential Reception Report is printed or not is set.
Bulletin TX Report: ON*/OFF
- Whether Bulletin TX Report is printed or not is set.
Relay TX Result Report: ON*/OFF
- Whether Relay TX Result Report is printed or not is set.
Relay Request Report: ON*/OFF
- Whether Relay Request Report is printed or not is set.
PC-FAX TX Error Report: ON/OFF*
- Whether PC-FAX sending error report is printed or not is set.
Broadcast Result Report: All Destinations*/Each Destination
- The printing methods for Broadcast Result Report are set.
- When [Each Destination] is selected, Broadcast Report is output only
when fax cannot be sent even after redialing. Report is not output when
transmission exits normally.
TX Result Report Check
- Whether or not to display the transmission report selection screen is set.
When set to [ON], it is displayed every time there is a transmission.
*1
- When [ON] is set in [TX Result Report Check], the transmission result
report is printed when [Yes] is touched on the screen displayed during fax
transmission. It is not printed if [No] is touched.
* is a default value at the time of procurement.
10-86
*1
: ON*/OFF
Utility mode
cm5520