Oce cm5520 User Manual page 171

6
nominator and the touch [-] or [+].
In case of setting the Center Erase values for numeric display in
North American models (Inch), press keypad or [-] and [+]. "Input
Error" is displayed when a numerical value outside the range is in-
put. When "Input Error" is displayed or when there is any mistake
while entering the deletion width, press [C] (clear) key and enter the
value again.
For details on switching between decimal and fraction values, refer
to "User's Guide (Copy Operations)".
– For details on [Frame Erase], refer to "Sending the fax after remov-
ing the black shadow (Frame Erase)" on page 6-13.
6
Touch [OK].
Returns to Book Scan screen.
7
Touch [Close].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen
9
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning condi-
tions" on page 2-12 or "Scan Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on
page 6-4.
– For details on Communication Settings, refer to "Communication
Settings" on page 6-5.
6-20
Useful transmission functions
cm5520