10
10.4
Administrator Settings (G3)
This section describes administrator settings that are configured for G3 Fax TX. The descriptions in this sec-
tion also apply to Network Fax.
10.4.1
System Settings - Power Save Settings - Enter Power Save Mode
Select the condition on which the machine shifts to the power save mode.
-
[Normal]: When a fax is received during the power save mode, the fax job is printed. After a predeter-
mined time has elapsed, the machine shifts to the power save mode.
-
[Immediately] (default): When a fax is received during the power save mode, the fax job is printed and
then the machine immediately shifts to the power save mode.
10.4.2
System Settings - Output Settings - Print/Fax Output Settings - Fax
Specify the printing method for RX documents.
-
[Batch Print] (default): Printing is started after all documents are received.
-
[Page Print]: Printing is made each time a page of document is received.
10-14
Administrator Settings (G3)
VL3622c/VL2822c/VL2222c
10.4