Adjusting The Default Amount Of Water To Suit The Cup Size - Jura IMPRESSA C9 Manual Manual

Changing the coffee Changing the coffee
strength before preparation strength before preparation
Changing the amount of Changing the amount of
water during preparation water during preparation
Adjusting the default Adjusting the default
amount of water to amount of water to
suit the cup size suit the cup size
Example: Proceed as follows to to prepare a strong cup of coffee.
Precondition:
READY
T Open the cover of the Rotary Switch.
T Place a cup under the coffee spout.
g T Turn the Rotary Switch until
o T Press the Coffee button for as long as
played.
1 COFFEE
The pre-set amount of water flows into the cup. Preparation
stops automatically.
T Close the cover of the Rotary Switch.
Example: Proceed as follows to prepare a
Precondition:
READY
T Open the cover of the Rotary Switch.
Place a cup under the coffee spout.
T
o T Press the Coffee button.
The grinding operation starts.
strength is then briefly displayed.
g T Turn the Rotary Switch during the brewing operation until
is displayed.
110 ML
The set amount of water flows into the cup. Preparation
stops automatically.
T Close the cover of the Rotary Switch.
It is easy to make permanent settings for the amount of water for all
coffee and milk specialities as well as hot water according to the cup
size. As in the following example, adjust the amount of water once.
Every time you prepare a drink in the future, this amount of water
will be dispensed.
The permanent settings for adapting the amount of water to to the
cup size for all coffee and milk specialities as well as hot water follow
this model.
Example: To make permanent settings for the amount of water for
an espresso, proceed as follows:
Precondition:
READY
 Familiarising yourself with the control options
is displayed.
STRONG
/ .
STRONG
appears on the display.
READY
is displayed.
1 COFFEE
appears on the display.
READY
is displayed.
is displayed.
is dis-
STRONG
cup of coffee.
110 ML
and the coffee