Adjusting The Grinder - Jura IMPRESSA C9 Manual Manual

Adjusting the grinder

Adjusting the grinder
CAUTION CAUTION
You can adjust the grinder continuously to suit the roast of your cof-
fee.
If you adjust the fineness of grind when the grinder is not operating,
the grinding wheel could be damaged.
T Only adjust the fineness of grind when the grinder is run-
ning.
The fineness of grind setting is correct if the coffee flows regularly
from the coffee spout. A fine, thick crema is also formed.
Our recommendations:
Z Select a fine setting for a light roast.
If the fineness of grind setting is too fine, the coffee only
U
drips from the coffee spout.
Z Select a coarse setting for a darker roast.
U If the fineness of grind is too coarse the coffee flows too
quickly from the coffee spout.
Example: To change the fineness of grind during coffee preparation,
proceed as follows:
T Open the cover of the bean container.
T Remove the aroma preservation cover.
T Place a cup under the coffee spout.
o T Press the Coffee button.
The grinder starts and
the coffee strength is briefly displayed.
Turn the fineness of grind switch to the desired position
T
while the grinder is running.
The coffee will be prepared and the fineness of grind is
adjusted.
Close the aroma preservation cover and the cover of the
T
bean container.
 Preparing and using your IMPRESSA for the first time
1 COFFEE
is displayed. After this,