Permanently Setting The Amount Of Water For The Cup Size; Adjusting The Grinder - Jura A7 Instructions For Use Manual

T Place a cup under the dual spout.
T Open the powder chute for ground coffee.
FILL POWDER
T Place the filler funnel for ground coffee on
the powder chute.
T Place one level measuring spoon of ground
coffee into the filler funnel.
T Close the powder chute for ground coffee.
SELECT BUTTON
> T Press the Coffee button to start preparation.
COFFEE
, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all speciality coffees and hot
water according to the cup size. Adjust the amount
once as shown in the following example. Every
time you prepare a drink in the future, this amount
will be dispensed.
Example: Permanently adjust the amount of
cappuccino to the cup size.
READY
Precondition:
connected to the dual spout.
T Place a cup under the dual spout.
/ T Press and hold the Cappuccino button until
ENOUGH MILK?
/ T Release the Cappuccino button.
The milk foam is prepared.
T Press any button as soon as there is
sufficient milk foam in the cup.
OK
is displayed. Milk is
appears.
ENOUGH COFFEE ?
into the cup.
T Press any button as soon as there is
sufficient coffee in the cup.
OK , CAPPUCCINO
one cappuccino are permanently stored.
READY
E You can alter this setting at any time by
repeating the above procedure.

Adjusting the grinder

You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
CAUTION
If you adjust the consistency of grind when the
grinder is not operating, the grinder adjustment
switch could be damaged.
T Only adjust the consistency of grind when
the grinder is running.
The consistency of grind is correct if the coffee
flows regularly from the dual spout. In addition a
fine, thick crema forms.
Example: Change the consistency of grind during
the preparation of an espresso.
T Place a cup under the dual spout.
T Open the cover for grinder adjustment
switch.
< T Press the Espresso button to start prepara-
tion.
T Turn the grinder adjustment switch to the
desired position while the grinder is
running.
2 Preparation
, the coffee flows
, the set amounts for
43
de
en
fr
it
nl
es
pt
ru