Entering A Default Setting For The Amount Of Water For A Cup Size; Cappuccino With The Professional Cappuccino Frother - Jura ENA 5 Instructions For Use Manual

Entering a default setting for the amount of
water for a cup size
E
A default setting can be entered for the
amount of water for 1 coffee. When
preparing 2 coffees this amount is
dispensed per cup.
Precondition:
READY
and the coffee spout is set at the 1 cup position.
T
Place the cup under the coffee spout.
k T
Press the Rotary Switch and hold it down.
During grinding the strength of the coffee
is displayed.
k T
Continue to hold the Rotary Switch down
until
ENOUGH COFFEE ?
The coffee flows into the cup.
k T
Press the Rotary Switch again when enough
coffee has been filled into the cup.
, the default setting for the amount of
OK
water for one coffee has been entered.
READY
E
This setting can be changed at any time by
repeating the above procedure.
Cappuccino with the
Professional Cappuccino Frother
Precondition:
READY
and the coffee spout is set to the 1 cup position.
T
Remove the protective cover from the
Professional Cappuccino Frother.
T
Connect the milk pipe to the nozzle.
T
Insert the other end of the milk pipe into a
milk carton or connect it to a milk
container.
T
Place a cup under the nozzle.
appears on the display
appears.
appears on the display
T
Set the selector lever of the nozzle to the
p
milk foam position.
g T
Turn the Rotary Switch until
displayed.
k T
Press the Rotary Switch.
HEATING
appears as soon as the ENA is
READY
sufficiently heated.
l T
Turn the switch to position
, the milk foam is being prepared.
STEAM
y T
Turn the switch clockwise to position
when there is sufficient milk foam in the
cup.
E
You can prepare more milk foam within
about 40 seconds.
T
Place the cup under the coffee spout.
k T
Press the Rotary Switch to start coffee
preparation.
, the pre-set amount of water
1 CUP
flows into the cup. Preparation stops
automatically.
To ensure that the Professional Cappuccino
Frother works perfectly, it should be rinsed
and cleaned regularly (refer to Chapter 4
'Maintenance – Professional Cappuccino
Frother').
ENA 5
is
STEAM
en
m
.
o
it
de
fr
it
19