Jura IMPRESSA C9 Manual Manual page 21

g T Turn the Rotary Switch until
k T Press the Rotary Switch to confirm the setting.
appears briefly on the display to confirm the setting.
OK
, the maintenance button c lights up.
INSERT
Close the cover of the Rotary Switch.
T
T Remove the CLARIS plus filter cartridge from the Welcome
Pack.
T Remove the water tank and empty it.
T Lift the cartridge holder and insert the filter cartridge into
the water tank, applying slight pressure.
T Close the cartridge holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert.
Place a receptacle (at least 500 ml) under the frother.
T
c T Press the maintenance button.
FILTER RINSING
E You can interrupt rinsing of the filter at any time by pressing
any button.
The water may be slightly discoloured. This is not harmful to
E
health and does not affect the taste.
Filter rinsing stops automatically after approx. 500 ml.
HEATING
played. The filter is now activated.
 Preparing and using your IMPRESSA for the first time
YES w
. Water will flow out of the frother.
appears on the display, then
is displayed.
is dis-
READY
1