Permanent Settings In Programming Mode - Jura IMPRESSA C9 Manual Manual

 Familiarising yourself with the control options
Permanent settings in Permanent settings in
programming mode programming mode
Programme item
RINSE
BUTTONS
FILTER -

T Place an espresso cup under the coffee spout.
i T Press and hold the Espresso button.
1 ESPRESSO
i T Hold the Espresso button down until
COFFEE ?
i T Release the Espresso button.
Coffee preparation will start and the espresso will flow into
the cup.
T Press any button as soon as enough espresso has flowed
into the cup.
Preparation stops automatically.
display. The set amount of water for an espresso will be per-
manently stored.
E You can alter these settings at any time by repeating the
above procedure.
You can easily adjust your IMPRESSA to your personal coffee blends
and specialities. You can navigate through the easy-tounderstand
programme steps and make permanent settings by simply turning
and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Sub-item
,
C–CLEANING
(only when the
FILTER
filter is activated),
,
CLEAN
,
C–RINSE
(only when
DE-SCALE
the filter is not activated),
CLEAN
SELECT BUTTON
YES w
NO -
appears on the display.
appears.
appears on the display.
READY
Explanation
T Select the desired maintenance pro-
gramme.
If no action is taken, programming mode is
exited automatically after approx. five sec-
onds.
Select your settings for the coffee and
T
milk specialities and hot water.
Indicate whether you operate your
T
IMPRESSA with or without a CLARIS plus
filter cartridge.
ENOUGH
appears briefly on the
OK