Jura IMPRESSA C9 Manual Manual page 29

Programme item
(is only
HARDNESS
displayed when the
filter is not activated)
ENERGY
TIME
UNIT ON
OFF AFTER
INFO
DISPLAY
LANGUAGE
EXIT
Sub-item
,
INACTIVE
–
1°dH 30°dH
,
SAVE -
SAVE w
--:--
--:--
,
INACTIVE
–
0.5 HRS 15 HRS
,
ML/OZ
24H/AM PM
Settings in programming mode always follow the same model.
Example: To change the strength of one espresso from
to
NORMAL
Precondition:
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
SELECT BUTTON
E Next select the product button for which you would like to
make settings. No product is prepared during this procedure.
E To enter a setting for the double product, press the corre-
sponding button twice within a period of two seconds.
i T Press the Espresso button.
WATER
 Familiarising yourself with the control options
Explanation
T Adjust the water hardness.
T Select an energy saving mode.
T Set the time.
T Adjust the switch-on time.
T Set the number of hours after which the
IMPRESSA should switch off automatically.
T Keep track of all prepared coffee and
milk specialities and view the maintenance
status.
T Select the unit of the amount of water
and the time format.
T Select your language.
T Exit programming mode.
proceed as follows:
is displayed.
READY
appears.
RINSE
is displayed.
BUTTONS
STRONG
9