Unit Amount Of Water/Time Format; Language - Jura IMPRESSA C9 Manual Manual

 Permanent settings in programming mode
Unit amount of water/ Unit amount of water/
Time format Time format

Language

Language
0
You can change the unit of the amount of water from 'ml' to 'oz' and
the time format to '24 HRS' or 'AM/PM' .
Example: To change the unit for the amount of water from
, proceed as follows.
OZ
Precondition:
READY
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
ML/OZ
E To change the time format, turn the Rotary Switch until
is displayed.
AM PM
k T Press the Rotary Switch to enter the programme item.
ML
g T Turn the Rotary Switch until
k T Press the Rotary Switch to confirm the setting.
appears briefly on the display to confirm the setting.
OK
ML/OZ
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit the programme item.
DISPLAY
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
The language of your IMPRESSA is set with this programme item.
Example: To change the language from
proceed as follows.
Precondition:
READY
Open the cover of the Rotary Switch.
T
k T Keep the Rotary Switch pressed until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
ENGLISH
is displayed.
DISPLAY
is displayed.
OZ
EXIT
EXIT
ENGLISH
is displayed.
LANGUAGE
ML
appears.
RINSE
is displayed.
24H/
is displayed.
is displayed.
to
DEUTSCH
appears.
RINSE
is displayed.
to
,