Time; Programmable Switch-On Time - Jura IMPRESSA C9 Manual Manual

 Permanent settings in programming mode

Time

Time
Programmable Programmable
switch-on time switch-on time

g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
If the machine is disconnected from the mains, the time has to be
reset.
Precondition:
READY
Open the cover of the Rotary Switch.
T
k T Keep the Rotary Switch pressed until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
--:--
g T Turn the Rotary Switch to set the hour.
k T Press the Rotary Switch to confirm the hour setting.
g T Turn the Rotary Switch to set the minutes.
k T Press the Rotary Switch to confirm the minute setting.
appears briefly on the display to confirm the setting.
OK
TIME
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
READY
Close the cover of the Rotary Switch.
T
When a switch-on time has been set, the IMPRESSA switches on
every day at the set time and heats up.
E The programmable switch-on time can only be set when the
time has been set.
E The programmable switch-on of your IMPRESSA only works
when the machine is switched on at the power switch
(standby).
Example: To set the programmable switch-on time to
ceed as follows.
Precondition:
READY
Open the cover of the Rotary Switch.
T
k T Keep the Rotary Switch pressed until
EXIT
is displayed.
TIME
EXIT
is displayed.
is displayed.
appears.
RINSE
is displayed.
is displayed.
, pro-
07:30
appears.
RINSE