Jura IMPRESSA C9 Manual
Hide thumbs Also See for IMPRESSA C9:
Table of Contents

Advertisement

The IMPRESSA C9 Manual

The 'IMPRESSA Manual' has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.

Advertisement

Table of Contents
loading

Summary of Contents for Jura IMPRESSA C9

  • Page 1: The Impressa C9 Manual

    The IMPRESSA C9 Manual The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
  • Page 2: Table Of Contents

    Table of contents Your IMPRESSA C9 Control elements Proper use For your safety The IMPRESSA C9 Manual Symbol description ............................8 IMPRESSA C9 Connector System ............................10 © JURA on the Internet ............................10 Knowledge Builder ............................10 Preparing and using for the first time Set up ................................11...
  • Page 3 Disassembling and rinsing the Professional Cappuccino Frother ............42 Cleaning the bean container ........................43 Descaling the water tank ...........................43 Display messages Troubleshooting Transport and environmentally neutral disposal Transport / Empty system ......................... 47 Disposal ................................. 47 10 Technical data Index JURA contact details / Legal information...
  • Page 4: Control Elements

    Control elements Control elements Figure: IMPRESSA C9 Piano Black Cover of filler funnel for pre-ground coffee On/off button Filler funnel for pre-ground coffee Fineness of grind switch Water tank cover Bean container cover Water tank Bean container Power cable (side of machine)
  • Page 5 Control elements Front left: Front right: Plain text display Cappuccino button Ristretto button Milk foam button ü Espresso button Hot water button Coffee button Easy Cappuccino Frother Maintenance button Professional Cappuccino Frother Pre-ground coffee button Hot water nozzle Rotary Switch cover Rotary Switch The Connector System permits the use of different frothers.
  • Page 6: Proper Use

    JURA service centre. If the power cable for this machine is damaged, it must be repaired either directly by JURA or by a JURA approved service centre. Make sure that the IMPRESSA and the power cable are not located close to hot surfaces.
  • Page 7 The rating plate is located on the underside of your IMPRESSA. Further technical data is given in Chapter 10 ‘Technical Data’. Use only original JURA care products. Use of accessories that are not explicitly recommended by JURA could damage the IMPRESSA.
  • Page 8: The Impressa C9 Manual

    The IMPRESSA C9 Manual The IMPRESSA C9 Manual You are holding the manual for your IMPRESSA C9 in your hand. It will help you to familiarize yourself with your IMPRESSA safely and quickly and teach you the full range of facilities it offers.
  • Page 9: Impressa C9

    ‘touch of a button’ function without having to move the cup. In elegant piano black and with a new user interface, the high-quality IMPRESSA C9 is fully in keeping with current trends and exudes an aura of superiority, dura- bility and competence.
  • Page 10: Connector System

    IMPRESSA and on every aspect of cof- fee. Knowledge Builder You can familiarise yourself with your IMPRESSA C9 in a fun way on the PC. @ The Knowledge Builder awaits you at www.jura.com. The interactive assistant, LEO, will support you and explain the...
  • Page 11: Preparing And Using For The First Time

    2 Preparing and using your IMPRESSA for the first time 2 Preparing and using for the first time This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience. Set up Keep the packaging for your IMPRESSA.
  • Page 12: First-Time Use

    2 Preparing and using your IMPRESSA for the first time First-time use If the machine is operated with a defective power cable, there is a danger of electric shock. WARNING Never use a machine which has a defective power cable. Precondition: The water tank and bean container are full.
  • Page 13: Using And Activating Filter

    @ You can also try out the ‘Insert filter’ operation online. Visit the Knowledge Builder at www.jura.com. E Perform the ‘Insert filter’ operation without interruptions. This will ensure that your IMPRESSA always produces at its best. Precondition: is displayed.
  • Page 14: Determining Water Hardness And Adjusting

    2 Preparing and using your IMPRESSA for the first time Filter rinsing stops automatically after approx. 500 ml. appears on the display, then is dis- HEATING READY played. The filter is now activated. Determining water E However, if you are using the CLARIS filter cartridge and have hardness and adjusting activated it, you will not be able to adjust the water hard- ness.
  • Page 15: Adjusting The Grinder

    2 Preparing and using your IMPRESSA for the first time Adjusting the grinder You can adjust the grinder continuously to suit the roast of your coffee. CAUTION If you adjust the fineness of grind when the grinder is not operating, the grinding wheel could be damaged.
  • Page 16: Switching On

    2 Preparing and using your IMPRESSA for the first time Switching on Q T Press the On/Off button to switch the IMPRESSA on. is displayed. HEATING , the maintenance button c lights up. PRESS RINSE T Place a receptacle under the coffee spout. c T Press the maintenance button.
  • Page 17: Familiarising Yourself With The Control Options

    To do this, press any button. @ If you prefer to familiarise yourself with your IMPRESSA in a fun way on the computer, the interactive Knowledge Builder tutorial programme can be found on the Internet at www.jura.com.
  • Page 18: Preparation At The Touch Of A Button

    3 Familiarising yourself with the control options Preparation at the Prepare your favourite coffee speciality at the touch of a button. touch of a button All coffee specialities are prepared following this model at the touch of a button. Preparing a coffee speciality Example: This is how to prepare one espresso.
  • Page 19: Changing Coffee Strength Before Preparation

    3 Familiarising yourself with the control options Changing the coffee Example: Proceed as follows to to prepare a strong cup of coffee. strength before preparation Precondition: is displayed. READY T Open the cover of the Rotary Switch. T Place a cup under the coffee spout. g T Turn the Rotary Switch until is displayed.
  • Page 20: Permanent Settings In Programming Mode

    3 Familiarising yourself with the control options T Place an espresso cup under the coffee spout. i T Press and hold the Espresso button. appears on the display. 1 ESPRESSO i T Hold the Espresso button down until ENOUGH appears. COFFEE ? i T Release the Espresso button.
  • Page 21 3 Familiarising yourself with the control options Programme item Sub-item Explanation T Select an energy saving mode. ENERGY SAVE - SAVE w T Set the number of hours after which – OFF AFTER 0.5 HRS 15 HRS the IMPRESSA should switch off auto- matically.
  • Page 22: Query Information And Maintenance Status

    3 Familiarising yourself with the control options k T Press the Rotary Switch to confirm the setting. appears briefly on the display to confirm the setting. STRENGTH g T Turn the Rotary Switch until is displayed. EXIT k T Press the Rotary Switch to exit the programme item. SELECT BUTTON g T Turn the Rotary Switch until is displayed.
  • Page 23 3 Familiarising yourself with the control options g T Turn the Rotary Switch until is displayed. CLEAN k T Press the Rotary Switch to enter the programme item. The number of performed cleaning operations appears on the display. E The maintenance status can also be displayed in addition to the number of performed maintenance programmes by turn- ing the Rotary Switch.
  • Page 24: Preparation At The Touch Of A Button

    Your IMPRESSA prepares a cappuccino at the touch of a button. It is not necessary to move the cup. E The IMPRESSA C9 is equipped with a heating element for pre- paring coffee and steam. After preparing several cappuccinos within a short period of time, it is possible that the coffee only flows irregularly from the right-hand coffee spout.
  • Page 25: Pre-Ground Coffee

    4 Preparation at the touch of a button T Take the protective cover off the Cappuccino Frother. T Attach the milk pipe to the frother. T Insert the other end of the milk pipe into a milk carton or connect it to a milk container. T Place a cup under the frother.
  • Page 26: Hot Milk And Milk Foam

    4 Preparation at the touch of a button All coffee specialities with pre-ground coffee are prepared following this model. Example: This is how to prepare a cup of coffee using pre-ground coffee. T Place a cup under the coffee spout. v T Press the Pre-ground coffee button.
  • Page 27: Hot Water

    4 Preparation at the touch of a button ü T Press the milk foam button once more. , the milk foam is being prepared. MILK Preparation stops automatically. READY E You can prepare more milk foam within about 40 seconds. To ensure that the Cappuccino Frother works perfectly, it should be rinsed and cleaned regularly (refer to Chapter 6 ‘Maintenance –...
  • Page 28: Permanent Settings In Programming Mode

    5 Permanent settings in programming mode 5 Permanent settings in programming mode Products With the programme item you can enter individual set- BUTTONS tings for all coffee and milk specialities as well as hot water. The following permanent settings can be entered for coffee and milk specialities and hot water: Product Amount...
  • Page 29 5 Permanent settings in programming mode E To change a setting for a double product, press the corre- sponding button twice within a period of two seconds. p T Press the Cappuccino button. MILK k T Press the Rotary Switch to enter the programme item. 14 SEC g T Turn the Rotary Switch until is displayed.
  • Page 30: Energy Saving Mode (Energy Save Mode, E.s.m. © )

    5 Permanent settings in programming mode Energy saving mode An energy saving mode permanent setting can be made with the (Energy Save Mode, programme item (E.S.M. © ENERGY E.S.M. © SAVE - All coffee products as well as hot water can be prepared without having to wait.
  • Page 31: Restore Factory Settings

    5 Permanent settings in programming mode Example: Proceed as follows to change the automatic switch-off time from 2 HRS 1 HRS Precondition: is displayed. READY T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until appears.
  • Page 32: Unit Amount Of Water

    5 Permanent settings in programming mode k T Press the Rotary Switch. SELECT BUTTON i T Press the Espresso button. appears briefly on the display. The settings for ‘Espresso’ are reset to the factory settings. SELECT BUTTON g T Turn the Rotary Switch until is displayed.
  • Page 33: Language

    5 Permanent settings in programming mode Language The language of your IMPRESSA is set with this programme item. Example: To change the language from ENGLISH DEUTSCH proceed as follows. Precondition: is displayed. READY T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until appears.
  • Page 34: Maintenance

    6 Maintenance 6 Maintenance Your IMPRESSA has the following integrated maintenance pro- grammes: Rinse machine Filter change Clean machine Descale machine Rinse frother Clean frother E Clean or descale the machine or change the filter whenever the appropriate indicator lights up. Maintenance tips To ensure that you get many years of reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the...
  • Page 35: Filter Change

    E If the CLARIS filter cartridge is not activated, you will not be prompted to change the filter. @ You can also try out ‘changing the filter’ online. Visit the Knowledge Builder at www.jura.com. Change following a prompt To change the CLARIS filter cartridge when prompted to do so by...
  • Page 36: Clean Machine

    E Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. E JURA cleaning tablets are available from stockists. @ You can also try out the ‘clean machine’ operation online. Visit the Knowledge Builder at www.jura.com.
  • Page 37 The process is interrupted, ADD TABLET T Open the cover of the filler funnel for pre-ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. c T Press the maintenance button.
  • Page 38: Descale Machine

    Clean up any splashes immediately. E The descaling programme lasts approx. 45 minutes. E JURA descaling tablets are available from stockists. E If you use a CLARIS filter cartridge and this is activated, you will not be prompted to change the filter.
  • Page 39: Manual Descaling

    6 Maintenance T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a container that holds 500 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it in the machine.
  • Page 40: Rinsing The Cappuccino Frother

    6 Maintenance k T Keep the Rotary Switch pressed until appears. RINSE k T Press the Rotary Switch to enter the programme item. C–CLEANING g T Turn the Rotary Switch until is displayed. DE-SCALE k T Press the Rotary Switch. EMPTY TRAY T Close the cover of the Rotary Switch.
  • Page 41: Cleaning The Cappuccino Frother

    Use only original JURA care products. E The JURA Cappuccino Cleaner is available from stockists. E The IMPRESSA will not prompt you to clean the frother. @ You can also try out the ‘Cleaning the cappuccino frother’...
  • Page 42: Disassembling And Rinsing The Easy Cappuccino Frother

    6 Maintenance T Place another receptacle under the frother. c T Press the maintenance button. , the frother and pipe are cleaned. The opera- CLEANING tion stops automatically. WATER FOR CAPPUCCINO T Rinse the receptacle thoroughly, fill it with approx. 250 ml of fresh water and immerse the milk pipe in the water.
  • Page 43: Cleaning The Bean Container

    6 Maintenance Cleaning the bean Coffee beans may be covered with a slight oil film which remains on container the walls of the bean container. These residues may negatively affect the coffee results. For this reason clean the bean container from time to time.
  • Page 44: Display Messages

    7 Display messages 7 Display messages Message Cause/Result Action The water tank is empty. T Fill the water tank (see FILL WATER TANK You cannot prepare any coffee or Chapter 2, ‘Preparing and using milk specialities or hot water. for the first time – Filling the water tank’).
  • Page 45 7 Display messages Message Cause/Result Action There is too little pre-ground cof- T The next time you make NOT ENOUGH PRE-GROUND fee in the filler funnel. The coffee use more pre-ground IMPRESSA stops the operation. coffee (refer to Chapter 5, ‘Preparation at the touch of a button –...
  • Page 46: Troubleshooting

    ERROR are displayed. Customer Support in your country (see ‘JURA contact details / Legal information’). E If you have not been able to solve the problem, contact Cus- tomer Support in your country (see ‘JURA contact details / Legal information’).
  • Page 47: Transport And Environmentally Neutral Disposal

    9 Transport and environmentally neutral disposal 9 Transport and environmentally neutral disposal Transport / Empty Keep the packaging for your IMPRESSA. It should be used to protect system the machine during transportation. In order to protect the IMPRESSA from frost during transportation, the system must be emptied.
  • Page 48: Technical Data

    10 Technical data 10 Technical data Voltage 220–240 V ~, 50 Hz Power 1450 W Marks of conformity Power consumption Approx. 15 Wh ENERGY SAVE - Power consumption Approx. 9 Wh ENERGY SAVE w Pump pressure Static max. 15 bar Holding capacity of water tank 1,9 l Holding capacity...
  • Page 49: Index

    Index Index Coffee strength Changing the coffee strength before prepa- ration 19 Connector System 4, 10 © Adresses 52 Contact details 52 Amount Control options 17 Adjusting the default amount of water to Cover suit the cup size 19 Bean container 4 Changing the amount of water during Filler funnel for pre-ground coffee 4 preparation 19...
  • Page 50 Automatic switch-off 30 Internet 10 Energy saving mode (Energy Save Mode, E.S.M. ) 30 © Language 33 JURA contact details 52 Products 28 Unit amount of water 32 Prompt to take action Knowledge Builder 10 Symbols used 8 Proper use 6...
  • Page 51 Index Switching off 16 Switching on 16 Technical data 48 Transport 47 Troubleshooting 46 Use, First-time 12 Use, Proper 6 Voltage 48 Water hardness 14 Water tank 4 Descaling 43 Filling 11...
  • Page 52: Jura Contact Details / Legal Information

    2004/108/EC – Electromagnetic Compatibility 2009/125/EC – Ecodesign Technical changes We reserve the right to make technical changes. The illustrations used in the IMPRESSA C9 Manual show the IMPRESSA C9 Piano Black. Your IMPRESSA could incorporate minor changes. Feedback Your opinion is important to us! Use the contact link at www.jura.com.

Table of Contents