Jura IMPRESSA C9 Manual
  1. Manuals
  2. Brands
  3. Jura Manuals
  4. Coffee Maker
  5. IMPRESSA C9
  6. Manual

Jura IMPRESSA C9 Manual

Hide thumbs Also See for IMPRESSA C9:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual

The IMPRESSA C9 Manual

The 'IMPRESSA Manual' has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.

Advertisement

Table of Contents
loading

Related Manuals for Jura IMPRESSA C9

Summary of Contents for Jura IMPRESSA C9

  • Page 1: The Impressa C9 Manual

    The IMPRESSA C9 Manual The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

  • Page 2: Table Of Contents

    Table of contents Your IMPRESSA C9 IMPORTANT SAFEGUARDS Control elements Proper use For your safety The IMPRESSA C9 Manual Symbol description ............................12 IMPRESSA C9 Connector System ............................14 © JURA on the Internet ............................14 Knowledge Builder ............................14 Preparing and using for the first time Set up ................................15...
  • Page 3 Disassembling and rinsing the Professional Cappuccino Frother ............53 Cleaning the bean container ........................53 Descaling the water tank ...........................54 Display messages Troubleshooting Transport and environmentally neutral disposal Transport / Empty system .........................58 Disposal .................................58 10 Technical data Index JURA contact details / Legal information...

  • Page 4: Important Safeguards

    Important Safeguards IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 10, ‘Technical data’). Follow the basic safety When using electrical appliances, basic safety precautions should precautions always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Read all instructions.
  • Page 5 Important Safeguards Special cord set instructions a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care is exercised in their use.
  • Page 6 Important Safeguards Keep your hands and the cord away from hot parts of the appliance during operation. Never clean with scouring powders or hard implements. NEVER DO Never fill instant coffee, chocolate mix etc. into the grinder or (or you will void your ground coffee funnel (grinder by-pass).
  • Page 7 Important Safeguards...

  • Page 8: Control Elements

    Control elements Control elements Figure: IMPRESSA C9 Piano Black Cover of filler funnel for pre-ground coffee Fineness of grind switch Filler funnel for pre-ground coffee Bean container cover Water tank cover Bean container Water tank with aroma preservation cover Power switch and power cable Connector System ©...
  • Page 9 Control elements Front left: Front right: Plain text display Cappuccino button On/off button Milk foam button ü Maintenance button Hot water button Espresso button Easy Cappuccino Frother Coffee button Professional Cappuccino Frother Pre-ground coffee button Hot water nozzle Rotary Switch cover Rotary Switch The Connector System permits the use of different frothers.

  • Page 10: Proper Use

    JURA service centre. If the power cable for this machine is damaged, it must be repaired either directly by JURA or by a JURA approved service centre. Make sure that the IMPRESSA and the power cable are not located close to hot surfaces.
  • Page 11 The rating plate is located on the underside of your IMPRESSA. Further technical data is given in Chapter 10 ‘Technical Data’. Use only original JURA care products. Use of accessories that are not explicitly recommended by JURA could damage the IMPRESSA.

  • Page 12: The Impressa C9 Manual

    The IMPRESSA C9 Manual The IMPRESSA C9 Manual You are holding the manual for your IMPRESSA C9 in your hand. It will help you to familiarize yourself with your IMPRESSA safely and quickly and teach you the full range of facilities it offers.

  • Page 13: Impressa C9

    ‘touch of a button’ function without having to move the cup. In elegant piano black and with a new user interface, the high-quality IMPRESSA C9 is fully in keeping with current trends and exudes an aura of superiority, dura- bility and competence.

  • Page 14: Connector System

    IMPRESSA and on every aspect of cof- fee. Knowledge Builder You can familiarise yourself with your IMPRESSA C9 in a fun way on the PC. @ The Knowledge Builder awaits you at www.jura.com. The interactive assistant, LEO, will support you and explain the...

  • Page 15: Preparing And Using For The First Time

    2 Preparing and using your IMPRESSA for the first time 2 Preparing and using for the first time This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience. Set up Keep the packaging for your IMPRESSA.

  • Page 16: First-Time Use

    2 Preparing and using your IMPRESSA for the first time First-time use If the machine is operated with a defective power cable, there is a danger of electric shock. WARNING Never use a machine which has a defective power cable. Precondition: The water tank and bean container are full.

  • Page 17: Using And Activating Filter

    @ You can also try out the ‘Insert filter’ operation online. Visit the Knowledge Builder at www.jura.com. E Perform the ‘Insert filter’ operation without interruptions. This will ensure that your IMPRESSA always produces at its best. Precondition: is displayed.

  • Page 18: Determining Water Hardness And Adjusting

    2 Preparing and using your IMPRESSA for the first time T Place a receptacle (at least 500 ml) under the frother. c T Press the maintenance button. . Water will flow out of the frother. FILTER RINSING E You can interrupt rinsing of the filter at any time by pressing any button.

  • Page 19: Adjusting The Grinder

    2 Preparing and using your IMPRESSA for the first time g T Turn the Rotary Switch until is displayed. HARDNESS k T Press the Rotary Switch to enter the programme item. 16°dH g T Turn the Rotary Switch until is displayed. 25°dH k T Press the Rotary Switch to confirm the setting.

  • Page 20: Switching On

    2 Preparing and using your IMPRESSA for the first time o T Press the Coffee button. The grinder starts and is displayed. After this, 1 COFFEE the coffee strength is briefly displayed. T Turn the fineness of grind switch to the desired position while the grinder is running.
  • Page 21 2 Preparing and using your IMPRESSA for the first time c T Press the maintenance button. appears on the display, and the right coffee RINSING spout is rinsed. CAPPUCCINO RINSING Cappuccino rinsing starts, and then stops automatically. The IMPRESSA is switched off (standby), and the indicator light lights up.

  • Page 22: Familiarising Yourself With The Control Options

    To do this, press any button. @ If you prefer to familiarise yourself with your IMPRESSA in a fun way on the computer, the interactive Knowledge Builder tutorial programme can be found on the Internet at www.jura.com.

  • Page 23: Preparation At The Touch Of A Button

    3 Familiarising yourself with the control options Preparation at the Prepare your favourite coffee speciality at the touch of a button. touch of a button All coffee specialities are prepared following this model at the touch of a button. Preparing a coffee speciality Example: This is how to prepare one espresso.

  • Page 24: Adjusting The Default Amount Of Water To Suit The Cup Size

    3 Familiarising yourself with the control options Changing the coffee Example: Proceed as follows to to prepare a strong cup of coffee. strength before preparation Precondition: is displayed. READY T Open the cover of the Rotary Switch. T Place a cup under the coffee spout. g T Turn the Rotary Switch until is displayed.

  • Page 25: Permanent Settings In Programming Mode

    3 Familiarising yourself with the control options T Place an espresso cup under the coffee spout. i T Press and hold the Espresso button. appears on the display. 1 ESPRESSO i T Hold the Espresso button down until ENOUGH appears. COFFEE ? i T Release the Espresso button.
  • Page 26 3 Familiarising yourself with the control options Programme item Sub-item Explanation (is only T Adjust the water hardness. HARDNESS INACTIVE displayed when the – 1°dH 30°dH filter is not activated) T Select an energy-saving mode. ENERGY SAVE - SAVE w T Set the time.

  • Page 27: Query Information And Maintenance Status

    3 Familiarising yourself with the control options g T Turn the Rotary Switch until is displayed. STRENGTH k T Press the Rotary Switch to enter the programme item. STRONG g T Turn the Rotary Switch until is displayed. NORMAL k T Press the Rotary Switch to confirm the setting. appears briefly on the display to confirm the setting.
  • Page 28 3 Familiarising yourself with the control options g T Turn the Rotary Switch until is displayed. CLEAN E Turn the Rotary Switch to switch to the performed descaling, filter change and cappuccino cleaning operations. k T Press the Rotary Switch to enter the programme item. The number of performed cleaning operations appears on the display.

  • Page 29: Preparation At The Touch Of A Button

    E During preparation, you can change the set amount by turn- ing the Rotary Switch. @ You can also try out the preparation of coffee specialities online. Visit the Knowledge Builder at www.jura.com. Espresso The classic coffee drink from Italy. There is a definite crema on the surface of the espresso.

  • Page 30: Coffee

    Your IMPRESSA prepares a cappuccino at the touch of a button. It is not necessary to move the cup. E The IMPRESSA C9 is equipped with a heating element for pre- paring coffee and steam. After preparing several cappuccinos within a short period of time, it is possible that the coffee only flows irregularly from the right-hand coffee spout.
  • Page 31 4 Preparation at the touch of a button Preparation stops automatically after reaching the pre-set amount of water. appears on the display. READY To ensure that the Easy Cappuccino Frother works perfectly, it should be rinsed and cleaned regularly (refer to Chapter 6 ‘Mainte- nance –...

  • Page 32: Pre-Ground Coffee

    4 Preparation at the touch of a button Pre-ground coffee You can choose a second coffee blend with the filler funnel for pre- ground coffee. E Never add more than two level measuring spoons of pre- ground coffee. E Use pre-ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips.

  • Page 33: Foaming Milk With The Easy Cappuccino Frother

    4 Preparation at the touch of a button Foaming milk with the Easy Cappuccino Frother T Take the protective cover off the Easy Cappuccino Frother. T Attach the milk pipe to the frother. T Insert the other end of the milk pipe into a milk carton or connect it to a milk container.

  • Page 34: Hot Water

    4 Preparation at the touch of a button T Place a cup under the frother. T Turn the selection lever of the frother to the milk foam posi- tion p. E If you want to heat the milk, set the selection lever of the frother to the milk position t.

  • Page 35: Permanent Settings In Programming Mode

    5 Permanent settings in programming mode 5 Permanent settings in programming mode Products With the programme item you can enter individual set- BUTTONS tings for all coffee and milk specialities as well as hot water. The following permanent settings can be entered for coffee and milk specialities and hot water: Product Amount...
  • Page 36 5 Permanent settings in programming mode E Next select the product button for which you would like to make settings. No product is prepared during this procedure. E To change a setting for a double product, press the corre- sponding button twice within a period of two seconds. p T Press the Cappuccino button.

  • Page 37: Energy-Saving Mode

    5 Permanent settings in programming mode Resetting the products to You can reset the values of all products individually to the works set- works settings ting. Example: Proceed as follows to reset the values of 1 espresso and 2 espressi to the works setting. Precondition: The IMPRESSA must be switched off (standby).

  • Page 38: Time

    5 Permanent settings in programming mode g T Turn the Rotary Switch until is displayed. EXIT k T Press the Rotary Switch to exit programming mode. READY T Close the cover of the Rotary Switch. Time If the machine is disconnected from the mains, the time has to be reset.

  • Page 39: Automatic Switch-Off

    5 Permanent settings in programming mode g T Turn the Rotary Switch until appears. UNIT ON k T Press the Rotary Switch to enter the programme item. --:-- g T Turn the Rotary Switch until is displayed. 07:00 k T Press the Rotary Switch to confirm the hour setting. g T Turn the Rotary Switch until is displayed.

  • Page 40: Unit Amount Of Water / Time Format

    5 Permanent settings in programming mode Unit amount of water / You can change the unit of the amount of water from ‘ml’ to ‘oz’ and Time format the time format to ‘24 HRS’ or ‘AM/PM’ . Example: To change the unit for the amount of water from , proceed as follows.
  • Page 41 5 Permanent settings in programming mode k T Press the Rotary Switch to enter the programme item. ENGLISH g T Turn the Rotary Switch until is displayed. DEUTSCH k T Press the Rotary Switch to confirm the setting. appears briefly on the display to confirm the setting. SPRACHE g T Turn the Rotary Switch until is displayed.

  • Page 42: Maintenance

    6 Maintenance 6 Maintenance Your IMPRESSA has the following integrated maintenance pro- grammes: Rinse machine Filter change Clean machine Descale machine Rinse frother Clean frother E Clean or descale the machine or change the filter whenever the appropriate indicator lights up. Maintenance tips To ensure that you get many years of reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the...

  • Page 43: Filter Change

    E If the CLARIS filter cartridge is not activated, you will not be prompted to change the filter. @ You can also try out ‘changing the filter’ online. Visit the Knowledge Builder at www.jura.com. Change following a prompt To change the CLARIS filter cartridge when prompted to do so by...

  • Page 44: Clean Machine

    E Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. E JURA cleaning tablets are available from stockists. @ You can also try out the ‘clean machine’ operation online. Visit the Knowledge Builder at www.jura.com.

  • Page 45: Cleaning Following Prompt

    The process is interrupted, ADD TABLET T Open the cover of the filler funnel for pre-ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. c T Press the maintenance button.

  • Page 46: Descale Machine

    Clean up any splashes immediately. E The descaling programme lasts approx. 45 minutes. E JURA descaling tablets are available from stockists. E If you use a CLARIS filter cartridge and this is activated, you will not be prompted to change the filter.
  • Page 47 6 Maintenance T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a container that holds 500 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it in the machine.

  • Page 48: Rinsing The Easy Cappuccino Frother

    6 Maintenance Manual descaling You can initiate the ‘Descaling the machine’ operation manually. Precondition: is displayed and the filter is not activated. READY T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until appears. RINSE k T Press the Rotary Switch to enter the programme item.

  • Page 49: Cleaning The Easy Cappuccino Frother

    Use only original JURA care products. E The JURA Cappuccino Cleaner is available from stockists. E The IMPRESSA will not prompt you to clean the frother. @ You can also try out the ‘Cleaning the cappuccino frother’...

  • Page 50: Disassembling And Rinsing The Easy Cappuccino Frother

    6 Maintenance T Pour 250 ml of fresh water into a container and add one cap- ful (max. 15 ml) of Cappuccino Cleaner. T Immerse the milk pipe in the receptacle. T Place another receptacle under the frother. c T Press the maintenance button. , the frother and pipe are cleaned.

  • Page 51: Cleaning The Professional Cappuccino Frother

    Cappuccino Frother If the wrong cleaning agent is used, the machine could be damaged CAUTION and/or traces of detergent could be left behind in the water. Use only original JURA care products.
  • Page 52 6 Maintenance E The JURA Cappuccino Cleaner is available from stockists. E The IMPRESSA will not prompt you to clean the frother. @ You can also try out the ‘Cleaning the cappuccino frother’ operation online. Visit Knowledge Builder www.jura.com. Precondition: is displayed.

  • Page 53: Disassembling And Rinsing The Professional Cappuccino Frother

    6 Maintenance Disassembling and rinsing the Professional T Carefully remove the frother from the Connector System © Cappuccino Frother by twisting slightly. T Dismantle the frother completely. T Rinse all the frother parts thoroughly under running water. T Re-assemble the frother. E Ensure that the individual parts are correctly and firmly attached to one another to ensure optimum function of the frother.

  • Page 54: Descaling The Water Tank

    6 Maintenance Descaling Limescale deposits may form in the water tank. To ensure correct the water tank function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLARIS filter cartridge, remove this. T Descale the tank with a mild, commercially available descal- ing agent in accordance with the instructions of the manu- facturer.

  • Page 55: Display Messages

    7 Display messages 7 Display messages Message Cause/Result Action The water tank is empty. T Fill the water tank (See FILL WATER TANK You cannot prepare any coffee Chapter 2, ‘Preparing and or milk specialities or hot using for the first time – Filling water.
  • Page 56 7 Display messages Message Cause/Result Action There is too little pre-ground T The next time you make NOT ENOUGH PRE-GROUND coffee in the filler funnel. The coffee use more pre-ground IMPRESSA stops the operation. coffee (refer to Chapter 4, ‘Preparation at the touch of a button –...

  • Page 57: Troubleshooting

    Contact customer support in your country (see ‘JURA contact details / Legal information’). E If you have not been able to solve the problem, contact cus- tomer support in your country (see ‘JURA contact details / Legal information’).

  • Page 58: Transport And Environmentally Neutral Disposal

    9 Transport and environmentally neutral disposal 9 Transport and environmentally neutral disposal Transport / Empty Keep the packaging for your IMPRESSA. It should be used to protect system the machine during transportation. In order to protect the IMPRESSA from frost during transportation, the system must be emptied.

  • Page 59: Technical Data

    10 Technical data 10 Technical data Voltage 230 V AC, 50 Hz 120 V AC, 60 Hz 220 – 240 V AC, 50 Hz 220 V AC, 50 Hz Power 1450 W Safety test S F D G Power consumption 3,7 Wh in standby mode Power consumption...

  • Page 60: Index

    Index Index Coffee strength Changing the coffee strength before prepa- ration 24 Connector System 8, 14 © Adresses 64 Contact details 64 Amount Control options 22 Adjusting the default amount of water to Cover suit the cup size 24 Bean container 8 Changing the amount of water during Filler funnel for pre-ground coffee 8 preparation 24...
  • Page 61 At the touch of a button 29 Pre-ground coffee 32 Cappuccino 30 Internet 14 Coffee 30 Espresso 29 Hot water 34 JURA contact details 64 Pre-ground coffee 32 Problems Knowledge Builder 14 Troubleshooting 57 Professional Cappuccino Frother 14 Cleaning 51...
  • Page 62 Index Rinse Maintenance button 9 Rinsing Easy Cappuccino Frother 48 Machine 42 Professional Cappuccino Frother 50 Rotary Switch 9 Safety information 10 Settings Adjusting the default amount of water to suit the cup size 24 One-off settings before and during prepara- tion 23 Permanent settings in programming mode Set up 15...

  • Page 64: Jura Contact Details / Legal Information

    2006/95/EC – Low Voltage Directive 2004/108/EC – Electromagnetic Compatibility Technical changes We reserve the right to make technical changes. The illustrations used in the IMPRESSA C9 Manual show the IMPRESSA C9 Piano Black. Your IMPRESSA could incorporate minor changes. Feedback Your opinion is important to us! Use the contact link at www.jura.com.

Table of Contents