Energy Saving Mode (E.s.m. ) - Jura IMPRESSA C9 Manual Manual

Resetting the products to Resetting the products to
works settings works settings
Energy saving mode Energy saving mode
(E.S.M. (E.S.M. ) )
© ©
You can reset the values of all products individually to the works set-
ting.
Example: Proceed as follows to reset the values of 1 espresso and
2 espressi to the works setting.
Precondition: The IMPRESSA must be switched off (standby).
T Press the Rotary Switch and the Espresso button for two sec-
onds at the same time until
The values of 1 espresso and 2 espressi are then reset to the
works setting. The IMPRESSA must be switched off
(standby).
An energy saving mode permanent setting can be made with the
programme item (E.S.M.
ENERGY
Z
SAVE -
U All coffee products as well as hot water can be prepared
without having to wait.
U The machine heats up before preparing cappuccino or
milk.
Z
SAVE w
U Approx. 5 minutes after the last preparation the IMPRESSA
switches to the energy-saving temperature and is not ready
for use.
Before coffee, hot water or milk can be prepared, the machine
U
heats up.
Example: Proceed as follows to change the energy saving mode
from to
SAVE - SAVE w
Precondition:
READY
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
SAVE -
g T Turn the Rotary Switch until
k T Press the Rotary Switch to confirm the setting.
appears briefly on the display to confirm the setting.
OK
ENERGY w
 Permanent settings in programming mode
appears.
OK
):
©
.
is displayed.
ENERGY -
SAVE w
appears.
RINSE
is displayed.
is displayed.