Table of Contents
Advertisement
, the pre-set amount of water flows
1 CUP
into the cup, preparation stops automati-
cally.
READY
It is also possible to prepare two cups of
E
pre-ground coffee. To this purpose place
two level measuring spoons of pre-ground
coffee into the filler funnel. Turn the Rotary
Switch to
2 CUPS
coffee preparation.
One-off setting before and during
preparation
The coffee strength can be changed before
preparation or during the grinding operation.
The following coffee strength options are possible
for 1 coffee:
Mild
Z
Normal
Z
Strong
Z
2 coffees are always prepared with the
E
coffee strength 'mild'.
The pre-set amount of water can be
E
changed during the brewing operation by
turning the Rotary Switch.
One-off settings before and during coffee
preparation always follow this model. These
settings are not saved.
Example: Changing the coffee strength of
1 coffee before preparation from
to
.
STRONG
Precondition:
READY
and the coffee spout is set at the 1 cup position.
Place the cup under the coffee spout.
T
Turn the Rotary Switch until
g T
displayed.
Press the Rotary Switch until
k T
displayed.
and press to start
NORMAL
appears on the display
is
STRONG
is
STRONG
During grinding the coffee strength
is displayed.
STRONG
, the pre-set amount of water flows
1 CUP
into the cup, preparation stops automati-
cally.
READY
Entering a default setting for the amount of
water for a cup size
A default setting can be entered for the
E
amount of water for 1 coffee. When
preparing 2 coffees this amount is
dispensed per cup.
Precondition:
READY
and the coffee spout is set at the 1 cup position.
Place the cup under the coffee spout.
T
Press the Rotary Switch and hold it down.
k T
During grinding the strength of the coffee
is displayed.
Continue to hold the Rotary Switch down
k T
until
ENOUGH COFFEE ?
The coffee flows into the cup.
Press the Rotary Switch again when enough
k T
coffee has been filled into the cup.
, the default setting for the amount of
OK
water for one coffee has been entered.
READY
This setting can be changed at any time by
E
repeating the above procedure.
Cappuccino with the Professional
Cappuccino Frother
Precondition:
READY
and the coffee spout is set to the 1 cup position.
Remove the protective cover from the
T
Professional Cappuccino Frother.
Connect the milk pipe to the nozzle.
T
Insert the other end of the milk pipe into a
T
milk carton or connect it to a milk
container.
ENA 5
appears on the display
appears.
appears on the display
45
en
it
en
en
it
Advertisement
Table of Contents
