Using And Activating Filter - Jura IMPRESSA C9 Manual Manual

 Preparing and using your IMPRESSA for the first time
Using and activating Using and activating
filter filter
0
T Place a receptacle under the frother.
c T Press the maintenance button.
SYSTEM FILLING
small amount of water flows from the frother.
This operation stops automatically, the following appears on
the display:
HEATING
PRESS RINSE
T Place a receptacle under the coffee spout.
c T Press the maintenance button.
RINSING
matically.
, your IMPRESSA is ready to use.
READY
E When a coffee speciality has been prepared for the first time,
it is possible that
the grinder has not yet been completely filled with coffee
beans. In this case prepare another coffee speciality.
Your IMPRESSA no longer has to be descaled if you are using CLARIS
plus filter cartridges.
@ You can also try out the 'Insert filter' operation online. Visit the
Knowledge Builder at www.jura.com.
Further information on the CLARIS plus filter cartridge can be found
in Chapter 8, 'CLARIS plus filter cartridge – Water for perfect coffee'.
E Perform the 'Insert filter' operation without interruptions. This
will ensure that your IMPRESSA always produces at its best.
Precondition:
READY
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
the display.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
NO -
, the system fills up with water. A
.
, the maintenance button c lights up.
, the machine rinses. The operation stops auto-
FILL BEANS
is displayed.
FILTER -
is shown on the display as
appears on
RINSE
is displayed.