Table of Contents
Advertisement
1.6 E1 Port Assignment
1.6 E1 Port Assignment
Used to assign parameters for E1 ports.
Note
• In some countries, the E1 card must not be connected to the Public Switched Network.
How to set up an E1 card
1. Insert E1 card into a free slot.
Notes
• E1 card should be installed in the free slot no. 1, 5 or 9 of each shelf.
• The next slot must be empty.
2. Assign the card type of the slot to "E1" in "1-1 Slot Assignment" screen.
3. Assign the channel type and the trunk group number of each port in "1-6 E1 Port
Assignment" screen.
Note
• The channel type should be assigned on the basis of the contract with a telephone
exchange.
4. Assign the parameters of the port like usual trunk line in "4-1 Trunk Line" screen.
5. Change the card status to "INS (In-Service)" in "1-1 Slot Assignment" screen. All the ports
are changed to "INS (In-Service)" status automatically.
22
Configuration
Advertisement
Table of Contents
