Table of Contents
Advertisement
8.2 TIE Routing Table
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
238
Leading Digit
Blank
Up to 3 digits consisting of 0-9 or X
Specifies the leading one, two or three digits of the number for TIE
calls. Used to determine the trunk group for routing a TIE call.
Note
• "X" can be used as a wild card character which substitutes any
digit in its position.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Digits to delete
0
0-16
Specifies the number of digits to be deleted from the dialled digits.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Number to be added
Blank
Up to 20 digits consisting of 0-9
Specifies the dialling number to be added to the dialled digits.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Trunk Group No.
None
None, 1-48
Specifies the trunk group hunt sequence to be used when placing a
TIE call.
The sequence is commonly used by all tenants but trunk group will
be skipped if it does not belong to the same tenant as the caller.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Private Network
Advertisement
Table of Contents
