Panasonic KX-TD500CE Programming Manual page 275

Error Code
E2010 Feature number duplicated.
Feature numbers can be from 1 to 4 digits and shouldn't be any conflicts.
The following are examples of feature number conflicts.
Examples: N and NX, NXX / NM and NML ( NL is allowed.)
E2011 Out of range.
Overflow Timer should be assigned in the range of Second: 5-180.
"None" shows that Overflow Timer doesn't work.
E2012 Trunk group number duplicated.
Each trunk group in the Local Hunt Sequence must have a unique number.
E3001 Invalid directory number for intercept destination.
There are five possible destinations for intercepted calls:
(1) An extension, (2) an external pager (TAFAS),(3) an OGM group,
(4) an extension group, or (5) a phantom extension.
E3002 Invalid directory number for overflow destination.
Only DN of an extension or FDN of an extension group can be assigned as an overflow
destination. However, the type of DN / FDN assignable depends on "Group Type."
E3003 Invalid directory number for UCD supervisor extension.
Only DN of an extension can be assigned as UCD supervisor extension.
E3004 Extension group number duplicated.
Each extension group in the same paging group must have a unique number.
E3005 The extension group already belongs to another paging group.
An extension group cannot belong to two or more paging groups.
E3006 Invalid directory number for DIL1:N destination.
Only DN of an extension or FDN of an extension group can be assigned as a DIL 1:N
destination.
E3008 Invalid directory number for DISA built-in Automated Attendant Tables.
Both DN of extensions and FDN of extension groups or phantom extensions or TAFAS
can be assigned as DISA built-in Automated Attendant Tables.
E3009 DIL 1:N destination duplicated.
The directory number (of the extension or extension group) must be unique as a
destination of DIL 1:N.
E3010 Invalid Mailbox Number.
Only DN of an extension or FDN of an extension group can be assigned as a DIL 1:N
Mailbox Number.
E4003 Invalid LCS playback password.
The LCS playback password must be 3 digits (0~9).
E4004 Invalid Call Log lock password.
The Call Log lock password must be 3 digits (0~9).
Programming Error Messages
Error Message
Description
11.1 Error Messages (EXXXX)
275