Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Group
[Operator Setting] Call Priority
CO Call:1, Intercept Routing:2, Recall:3, Extension Call:4
Priority 1-4
Specifies the answering priority of incoming calls to the Operator
Group by a type of call when more than one call is ringing at an
Operator extension.
(Assignable only when "Operator" is specified in "Group Type"
programming.)
Notes
• If all extensions in the Operator group are busy, incoming
calls directed to the group will be put in the waiting queue in
order of precedence determined by Call Priority setting.
• If the same priority is set on all four types of calls, the calls
will be put in the waiting queue in order of the arrival.
•1.3 System Features (F/G)
– Operator Group
•1.6 Originating Features (F/G)
– Operator Call
[UCD Setting] Time Table No.
None
None, 1-32
Specifies the UCD Time Table number for the UCD Group.
•1.3 System Features (F/G)
– Extension Group
•1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
3.3 Extension Group
121
Advertisement
Table of Contents
