Table of Contents
Advertisement
4.2 Trunk Line
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
146
[DDI / DID / TIE] Number to be added
Blank
Max. 8 digits consisting of 0-9
Specifies the number (1 to 8 digits) to be added to the number
received from the DDI / DID trunk / other PBX via DID / TIE lines.
• 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Answer Wait Timer
None
1.
None
2.
1 min
3.
2 min
4.
3 min
5.
4 min
Specifies the length of time in minutes the system waits, after an
outgoing CO call is made, before the other party answers the call.
If the call is not answered before this timer expires, the call will be
disconnected automatically.
(Assignable only when E1 / ELCOT card is installed in the system.)
Note
• In some countries, the E1 and the ELCOT cards must not be
connected to the Public Switched Network.
None
Line
Advertisement
Table of Contents
