Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Line
Port No.
1
1 - n [n = 4 (E&M), n =16 (BRI), n = 30 (PRI30), n = 31 (E1 except
Port No.16), n = 8 (Others)]
Specifies the trunk port which you are going to programme.
Note
• In some countries, the E1 and the E&M cards must not be
connected to the Public Switched Network.
•1.3 Trunk Port Assignment (P/G)
Group No.
(Display only)
1-48
Displays the Trunk Group to which the trunk line is assigned.
Note
• Each trunk line is assigned to a Trunk Group in Section
"1.3 Trunk Port Assignment."
•1.3 Trunk Port Assignment (P/G)
Name
CO001-CO192
Up to 10 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ %
( ) + , - / : ; < = > ? @ &.
Specifies the name for the trunk line.
Note
• This is shown on a display PT when making or receiving a call
using this trunk.
• 1.17 Display Features (F/G)
– Display, Call Information
4.2 Trunk Line
135
Advertisement
Table of Contents
