Table of Contents
Advertisement
2.5 System Timer
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
68
Transfer Recall Time
12 rings
0-48 rings
Specifies the number of rings before transfer recall occurs. If a
transferred call is not answered before the programmed number of
rings, the call returns to the extension user who originally
transferred it or an Operator depending on the setting of "6.
Transfer recall destination" in Section "2.8 System Option."
Note
• If "0" is specified, Transfer Recall does not occur.
None
Pickup Dial Waiting Time
1 s
1-5 s
Specifies the length of time in seconds that the system is to wait
after an extension user goes off-hook for making a call before the
system automatically dials the pre-assigned telephone number for
Pickup Dialling.
Note
• This waiting time gives the extension user an opportunity to dial
another number before automatic dialling is performed.
• 1.7 Dialling Features (F/G)
– Pickup Dialling (Hot Line)
• 2.2.2 Easy Dialling (U/M)
Call Duration Count Start Time
0 s
0-60 s
Specifies the length of time in seconds the system is to wait after
sending all dialling digits to the Central Office before starting the
call duration count.
Note
• The elapsed time of the call duration is shown on a display PT.
• 1.3 System Features (F/G)
– Station Message Detail Recording (SMDR)
System
Advertisement
Table of Contents
