Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Line
Mailbox No.
Same as the extension number
Up to 16 digits consisting of 0 - 9, , # or P [Pause]
Specifies the Mailbox Number, which is usually the same as the
extension number.
None
CO Key
CO-01:Loop-CO, Others:Not Stored
Please refer to Section "4.3.2 Flexible CO Key Assignment."
Used to determine the usage of the flexible CO buttons on a PT.
You can enter into "Flexible CO Key" screen in Section "4.3.2
Flexible CO Key Assignment" by clicking [CO Key] button on this
screen.
• 4.1.2 Customising the Buttons (U/M)
PF Key
Not Stored
Please refer to Section "4.3.3 Flexible PF Key Assignment for PT."
Used to determine the usage of PF (Programmable Feature) buttons
on a PT.
You can enter into "Flexible PF Key " screen in Section "4.3.3
Flexible PF Key Assignment for PT" by clicking [PF Key] button
on this screen.
• 4.1.2 Customising the Buttons (U/M)
Initial Display Selection
Caller ID
1.
Caller ID
2.
Trunk Name
3.
DDI / DID Name
Specifies the initial display of a display PT when an incoming CO
call with Caller ID information comes in on it.
• 4.1.1 Initial Settings (U/M)
4.3 Extension Line
151
Advertisement
Table of Contents
