Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
[Serial Interface Port] PROG (Port 1)
Please refer to "System Programming and Diagnosis with Personal Computer" in Section "1.2
System Administration" of the Features Guide.
Note
• Generally speaking, you should connect your Programming PC to Port 1 and your SMDR
printer to Port 2.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Maintenance
[Password] Walking COS
1234
4-7 digits consisting of 0-9
Specifies the password required for using the Walking COS feature.
• 1.6 Originating Features (F/G)
– Walking COS
• 2.2.5 Calling without Restrictions (U/M)
[Serial Interface Port] PROG – Parity
(Display only)
None
A parity code indicates what type of parity is used to detect an error
in the string of bits composing a character. Make an appropriate
selection depending on the requirements of your printer or personal
computer.
Note
• Port 1 is fixed to "None."
None
[Serial Interface Port] PROG – NL Code
CR+LF
1.
CR+LF
2.
CR
Specifies the NL (New Line) Code for your printer or personal
computer.
If your printer or personal computer automatically feeds lines with
a carriage return, select "CR (Carriage Return)."
If not, select "CR+LF (Line Feed)."
None
10.6 System Parameters
261
Advertisement
Table of Contents
